PowerBridge LiFe RT 1K
| MODEL | PowerBridge LiFe RT 1K | |
| PHASE | Single phase with ground | |
| CAPACITY | 1000 VA / 900 W | |
| INPUT | ||
| NOMINAL VOLTAGE | 200/208/220/230/240 VAC | |
| VOLTAGE RANGE | LOW LINE TRANSFER | 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 3 % based on load percentage 100% – 80 % / 80 % – 70 % / 70 – 60 % / 60 % – 0 |
| LOW LINE COMEBACK | 175 VAC / 155 VAC / 135 VAC / 125 VAC ± 3 % based on load percentage 100% – 80 % / 80 % – 70 % / 70 – 60 % / 60 % – 0 | |
| HIGH LINE TRANSFER | 150 VAC ± 3% or 300 VAC ± 3% | |
| HIGH LINE COMEBACK | 145 VAC ± 3% or 290 VAC ± 3% | |
| FREQUENCY RANGE | 40Hz ~ 70Hz | |
| POWER FACTOR | 0.99 @ nominal voltage (100% load) | |
| THDi | ≦ 5% @160-265 VAC or 80~140 VAC input and full linear load condition 10% @160-265 VAC or 80~140 VAC input and 50% linear load condition | |
| OUTPUT | ||
| OUTPUT VOLTAGE | 200*/208*/220/230/240 VAC | |
| OUTPUT POWER FACTOR | 1.0 | |
| AC VOLTAGE REGULATION (Batt. Mode) | ± 1% | |
| FREQUENCY RANGE (Synchronized Range) | 57~63Hz or 47 ~ 53 Hz | |
| FREQUENCY RANGE (Batt. Mode) | 60 Hz ± 0.1 Hz or 50Hz ± 0.1 Hz | |
| CURRENT CREST RATIO | 3:1 | |
| HARMONIC DISTORTION | 2 % THD (Linear Load) ; 4 % THD (Non-linear Load) | |
| TRANSFER TIME | AC TO BATTERY MODE | ZERO |
| INVERTER TO BYPASS | <4 ms (Typical) | |
| ECO TO BYPASS | 8 ms (Typical) | |
| WAVEFORM (Batt. Mode) | Pure Sinewave | |
| OVERLOAD CAPACITY | AC MODE | 100% < Load < 110% Overload warning only 110% < Load < 130% 5min (+/- 4sec) 130% < Load < 140% 30sec (+/- 1sec) 140% < Load 1.5sec (+/- 0.5sec). |
| INVERTER (BATTERY) MODE | 100% < Load < 110% Overload warning only 110% < Load < 130% 1min (+/- 4sec) 130% < Load < 140% 2sec (+/- 1sec) 140% < Load 1.5sec (+/- 0.5sec). | |
| EFFICIENCY | ||
| AC MODE @ FULL LOAD | 90%@ Battery fully charged | |
| ECO MODE @ FULL LOAD | 96% @ full charged battery | |
| BATTERY MODE @ FULL LOAD | 87% | |
| BATTERY | ||
| BATTERY TYPE | LiFe 247500 | |
| BATTERY LIFECYCLE | > 2000 | |
| SINGLE CELL TYPE | LFP26650P-260 | |
| BATTERY NUMBERS | 1 | |
| BATTERY CELL CONFIGURATION | 8S3P | |
| BATTERY VOLTAGE | 25.6V | |
| BATTERY VAH (Factory Setting) | 7.5Ah | |
| AUTONOMY TIME @ Full Load | 9.5 minutes | |
| CHARGING VOLTAGE | 28VDC ± 1% | |
| CHARGING MODE | 2 stage charging management(CC-CV) | |
| CHARGING CURRENT | 1A/2A/4A(Default)/6A/8A (Adjustable) | |
| TYPICAL RECHARGE TIME | 2 hours recover to 90% capacity | |
| STATUS INDICATION | ||
| LCD DISPLAY | Load Level, Battery Level, AC Mode, Battery Mode, Bypass Mode, UPS Fault | |
| AUDIBLE ALARM | Battery Mode, Low Battery, UPS Fault, Overload | |
| COMMUNICATION | ||
| POWER MANAGEMENT SOFTWARE | Support Window Family, Linux & MAC | |
| INTERFACE | USB & RS-232 Communication Port | |
| INTELLIGENT SLOT | SNMP Slot | |
| PHYSICAL | ||
| OPERATING ENVIRONMENT | 0-40°C, 20 – 95% Relative Humidity (Non-Condensing) | |
| NOISE LEVEL | <50dBA @ 1 Meter | |
| DIMENSION (D x W x H)mm | 410 x 438 x 88 (2U) | |
| NET WEIGHT (KG) | 10.8 | |
| WARRANTY | ||
| UPS WARRANTY | 2 Years Full Warranty include Parts, Labour & 5 Years for Battery | |
| STANDARD | ||
| EMC / SAFETY | CE (EMC: EN62040-2 C2) for HV models, FCC (Class A) for LV models, Battery Pack comply to UL1973 | |
