The PowerCube Series features a line-interactive topology with simulated sinewave output, providing cost-effective and reliable power protection. It includes mounting slots for easy wall installation, helping users save space.
This series delivers full protection against power surges and spikes and is equipped with a 3-LED indicator panel to clearly display UPS status: AC Mode, Battery Mode, and Fault Condition.
A built-in boost and buck Automatic Voltage Regulator (AVR) ensures stable power delivery to connected devices.
Perfect for home or small office use, the PowerCube Series is ideal for safeguarding personal computers, workstations, networking equipment, and Point-of-Sale (POS) systems.
| MODEL | PowerCube 800G2 |
| CAPACITY (VA/WATTS) | 800VA |
| INPUT | |
| INPUT VOLTAGE | 220V/230V/240V |
| VOLTAGE RANGE | 162 - 290VAC |
| INPUT FREQUENCY | 45-65Hz (Auto-sensing) |
| OUTPUT | |
| OUTPUT VOLTAGE | 220V/230V/240V |
| VOLTAGE REGULATION (Battery Mode) | +/-10% |
| OUTPUT FREQUENCY | 50Hz or 60Hz |
| FREQUENCY REGULATION (Battery Mode) | +/-1 Hz |
| WAVEFORM | Simulated Sinewave |
| TRANSFER TIME (Typical) | 2ms - 6ms |
| OUTPUT SOCKET | 4 x 13Amp British Socket c/w Safety Window + 2 x IEC Output Socket |
| BATTERY | |
| SEALED LEAD ACID MAINTENANCE FREE BATTERY | 12V 7Ah x 1pc |
| HOT-SWAPPABLE BATTERY (USER REPLACEABLE DESIGN) | Yes ( Able to replace battery without turning off UPS ) |
| BACK UP TIME (Depending on Load) | 20 - 30 Minutes |
| RECHARGE TIME | 3 Hours to 90% After Complete Discharge |
| STATUS INDICATOR | |
| LED INDICATOR | AC Mode - Green LED Lighting |
| Battery Mode - Yellow LED Flashing | |
| UPS Fault - Red LED Lighting | |
| AUDIBLE ALARM | Backup Mode - Beeping every 10 seconds |
| Low Battery - Beeping every second | |
| Battery Replacement - Sounding every 2 seconds | |
| Overload - Beeping every 0.5 seconds | |
| UPS Fault - Continuously Beeping | |
| COMMUNICATION | |
| POWER MANAGEMENT SOFTWARE |
-Automatically Shutdown, Saves Application Data Before Exit -Power Flow Display for Monitoring UPS Status |
|
-Schedules System Shutdown/Restart -Warning Notification Via Email/Pager/Broadcast | |
|
-Remote Monitor/Control via LAN - Safety Shutdown Multi System | |
| INTERFACE | RS232 & USB Port |
| SURGE PROTECTION & FILTERING | |
| FULL PROTECTION | Discharge, Overcharge and Overload Protection |
| LIGHTNING, SURGE PROTECTION | Yes |
| OVERLOAD PROTECTION | Fuse, Current Limited & Cut-off (Re-settable Circuit Breaker) |
| PHONE/FAX/MODEM/NETWORK PROTECTION | RJ45 ( 1 in 1 out) |
| PHYSICAL | |
| OPERATING ENVIRONMENT | 0-40℃, 0-90% Relative Humidity (Non-Condensing) |
| NOISE LEVEL | Less than 40dB |
| DIMENSION (D x W x H)mm | 292 x 199 x91 |
| WEIGHT (KG) | 5.8 |
| WARRANTY | |
| UPS WARRANTY | 3 Years Full Warranty include Parts & Labour |
| 2 Years Warranty for Battery |
Right Power Technology Sdn Bhd 200001000536 (503141-M)
No. 16, Jalan TPK 2/4, Taman Perindustrian Kinrara,
47100 Puchong, Selangor, Malaysia.
Right Power Technology (Southern) Sdn Bhd 202401027088 (1572937-P)
(A subsidiary of Right Power Technology Sdn Bhd)
No 7-01, Jalan Kencana Mas 1/1, Kawasan Perindustrian Tebrau 3,
81100 Johor Bahru, Johor, Malaysia
Copyright © 2025 Right Power Technology Sdn Bhd 200001000536 (503141-M). All rights reserved. Powered by Shinjiru Technology.
